高线电压小电压电流冲击实验室检测仪（耐弧光冲击实验室检测仪）-（电脑调控）

High voltage low current tester (arc resistance tester) - (computer control)

货商品公司名称称：耐电弧试验机

Product name: electric arc resistance tester

软件材质：NDH-A

Product model: NDH - A

需求标准规范：GB/T 1411-2002《物质电绝缘文件耐高压得很低感应电流电孤释放电能的实验》（等一起IEC  61621-1997）及ASTM D495等原则的必须开发生产的，并复合IEC 149、UL 746A等校正方式方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要是选用位置及系统：

本经过多次实验发现机是，并按照采用做三相电机、设备落球回弹试验仪,介电击穿强度测定仪和家庭用的设备落球回弹试验仪,介电击穿强度测定仪等行业领域的低压电工用塑、环氧树脂胶胶和耐压带层漆等耐压带层村料的耐弧光效能评定标准，主用做固态垃圾耐压带层村料如：塑、膜、环氧树脂胶、矿石、卫浴陶瓷、玻璃钢、耐压带层油、耐压带层漆、瓦楞纸等媒介的耐弧光效能考试；

本试验报告机由计算方式机把控电脑运行，就能够凸显到现阶段测试设计报告情形及测试设计报告时候，测试设计报告尾声后并包存到现阶段测试设计报告数据表格，并可word打印.标准单位实验性评估。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该机为上立体式架构，下面为的操作设备，上侧为经过多次实验发现箱。

2 本好产品确认*新智慧管控高技术，确认选用编译程序（IEC或ASTM）可系统自动通过检测，并在网吧电脑手机上显视可靠性试验时候和最终结果。

3 **的性能不错，抗干拢实力强，测试英文导致精度较高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断时刻偏差：低于 ±10ms

2 调压器体积：2kVA

3 額定做实验的时候工作电压：12.5kV

4 耐压电流电压精确度：±3%

5 电压把握准确度：±10%  电压电流检测的精密度较：1.5%

6 参比电极对试件压力值：（0.5±0.05）N

7 电极材质材质：钨棒

8 探针距里：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 用生态环境的温度：（23±2）℃

10 利用生活环境室内温度：（50±5）%

11 24v电源：220V±5%  50Hz  10A

12 经过多次实验发现    方法步骤：   国家行业标准/美标/10 mA 间断性/20 mA 多次/30 mA不间断/40 mA连续式

13 可靠性试验编译程序如下所示：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 好产品尺寸：

NDH-A    耐电孤可靠性试验仪-微机把控好

NDH-B    耐电孤校正仪-触控屏调控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！